How to activate your Movistar eSIM on your iPhone: a step-by-step guide

Marc González Sáez Marc González Sáez ·October 12, 2026 ·10 min. read
Activate Movistar eSIM on iPhone | Travel eSIM | PuraSIM

How do I activate my Movistar eSIM on my iPhone step by step?

Open Settings → Cellular Data → Add eSIM, scan the QR code provided by Movistar, and confirm the plan. In a few moments, your iPhone verifies the profile and is ready to use data or make calls. If the QR doesn't scan, you can manually enter the code from the same screen.

This is the most direct method and works for most cases, so start here before looking for more complicated solutions:

  1. Open Settings on your iPhone and go to Cellular Data (on some models it appears as "Cellular" or "Mobile Data"). Tap "Add eSIM" or "Add Data Plan."
  2. Choose "Use QR Code" and point your camera at the code Movistar gave you, whether in the store, by email, or within the Mi Movistar app. The iPhone detects it automatically, without you needing to tap anything else.
  3. If the QR is on your phone's screen (for example, it arrived in an email you opened from your iPhone), you won't be able to point the camera at your own screen. In that case, tap "Use Saved Photo" within the same activation flow and select the screenshot of the code: the system reads it just as if it were live.
  4. If you don't have a camera available or the scan fails, tap "Enter Details Manually" and type the SM-DP+ address and activation code that appear as text below the QR. There are two fields, and a single mistyped character will cause it to fail, so double-check before continuing.
  5. Confirm the plan and decide if this eSIM will be your primary line or a secondary line (if you already have another physical SIM or active eSIM). Give it a name you recognize, like "Personal Movistar."
  6. Wait for verification. The iPhone communicates with Movistar to activate the profile; it usually takes seconds, though during peak hours it might take a couple of minutes. When it's done, you'll see the status "eSIM ready to use."

If you followed these steps and it still doesn't work, it's not necessarily your fault: keep reading, because the sections below cover every point where the process usually gets stuck.

What do you need before activating the Movistar eSIM?

Before touching anything in Settings, it's a good idea to check three things: that your iPhone is eSIM compatible, that it has the updated iOS version, and that you are connected to Wi-Fi (activation consumes data, and if you don't have an active data plan yet, you won't have cellular signal to do it).

eSIM compatible iPhones are the iPhone XS, XR models and all those launched later. If your device is older (iPhone X or earlier), eSIM is not an option on that device, and you need a physical SIM.

Requirement What to check Where to verify it
Compatible model iPhone XS, XR or later Settings → General → About
iOS updated Recent version installed Settings → General → Software Update
Stable connection Wi-Fi working (not cellular data if you don't have an active line yet) Control Center
Movistar code QR or manual code not previously used Email, Mi Movistar app or store receipt
Space for another line iPhone supports two active lines at once (one physical + one eSIM, or two eSIMs on recent models) Settings → Cellular Data

A detail almost no one checks: the Movistar QR code usually has only one use. If you have already scanned it once—even if the process was interrupted halfway—you will probably need to request a new one instead of trying again with the same one. Before repeating the process several times, it's quicker to verify if the code has already been consumed in the Movistar system.

How to activate the eSIM in the Mi Movistar app?

The official Movistar app is, along with direct QR scanning, the other common way to activate the eSIM without visiting a physical store. The flow within the app usually follows this logic:

  1. Download and log in to the Mi Movistar app with your number or registered user.
  2. Look for the "My Line" or "Manage my SIM" section and select the eSIM option.
  3. The app generates or displays the QR code associated with your line. If you already have one sent by email, there's no need to generate another.
  4. From there, you can tap "Activate now" (if your device allows opening Settings directly) or take a screenshot of the QR to scan it from Settings by following the steps in the previous section.
  5. Confirm your plan details within the app to verify that the line is correctly linked to your account.

If the app gets stuck loading on the QR generation screen, close the application completely (don't just minimize it) and reopen it. This is common behavior when the session didn't load completely, and it's almost always resolved by restarting the app instead of restarting the phone.

Woman with suitcase and phone at airport at sunset

Where can I activate the Movistar eSIM?

Activation doesn't depend on a single channel. You can do it yourself from your iPhone using the QR sent by email, manage it within the Mi Movistar app, or ask for direct help at a physical Movistar store if you prefer someone to do it for you at the time of purchase.

What changes between one channel and another is mainly speed: doing it yourself from Settings is usually the most immediate because you don't depend on opening hours or someone else processing the request. The physical store makes sense especially if you're starting a new line and need to validate your identity in person, something that simply scanning a QR doesn't solve.

When the eSIM depends on the provider activating something on their end—not just on you scanning a code—the waiting time is out of your hands. That's why, if you have a flight in a few hours and the process isn't moving forward, the most practical solution isn't to keep trying the same channel, but to have an alternative that doesn't depend on that specific activation.

Why won't the app let me activate the eSIM?

Most blockages at this point have one of these five causes, in order of frequency:

  • The QR code has already been used. Each Movistar activation code is designed for a single successful use. If the process was cut short halfway the first time, the system might consider it "already consumed" even if your eSIM isn't working.
  • Outdated iOS. Older iOS versions have known bugs with eSIM management, especially when moving lines between devices. Updating before trying again avoids half of these problems.
  • No actual internet connection. Being "connected" to Wi-Fi that actually has no internet access (hotel or shopping center networks with a captive portal) causes the verification to hang without showing a clear error.
  • Incorrectly configured date and time. If the iPhone has manual and out-of-sync date, the eSIM profile's security certificate verification fails. Check that it's set to Settings → General → Date & Time → Set Automatically.
  • The plan is not yet active on Movistar's side. If you just contracted the line, there might be an administrative delay before the profile is ready for download, regardless of whether your iPhone is perfect.

To find out which of the five is your case, start with the device's date and time: it's the quickest to check and the least suspected.

What does the error "Action could not be completed" mean?

This message appears when the iPhone tried to communicate with Movistar's activation server and did not receive a valid response. It's not an error with the phone itself: the device is working, but communication with the operator's server was interrupted or rejected.

The most common causes, from most to least probable:

  1. The code was already used before (even if it was a failed attempt).
  2. The internet connection was lost right during verification.
  3. Movistar's server is temporarily overloaded or undergoing maintenance.
  4. The profile was generated for another device (for example, if the QR was accidentally shared between two lines).

The solution that resolves most cases is simple: restart your iPhone, confirm that the Wi-Fi has a real internet connection (open any page in your browser to check), and try again. If the error persists after two or three attempts, it's no longer worth trying on your own: at that point, the problem is on Movistar's side, and you need them to generate a new code for you.

How do I know if my Movistar eSIM is already active?

Go to Settings → Cellular Data. If the Movistar line appears listed with its name and no warning icon next to it, the eSIM has been installed. To confirm it also has signal, check the top of the screen: it should show the operator's name and network type (4G, 5G, or similar) instead of "No Service" or "Searching...".

Another quick way to confirm is to try making a call or opening any data-using app with Wi-Fi turned off. If it loads content using only the cellular network, the line is working end-to-end, not just partially installed.

Person using a mobile phone in bed

What happens to this eSIM when you travel to another country?

The Movistar eSIM you just activated is designed to work within the local network of the country where you contracted the plan. When you leave that country, your iPhone may still show the line as active, but data usage outside your local network generally incurs roaming charges, speed restrictions, or directly a lack of coverage, depending on the specific conditions of your plan with Movistar.

This doesn't mean you have to deactivate your Movistar eSIM before traveling. A compatible iPhone supports two active lines simultaneously, so you can keep your Movistar line for calls and messages with your usual number, while using data through a second eSIM specifically contracted for your destination. This is the same "primary line + secondary line" logic you saw in step 5 of the activation section.

Movistar eSIM vs. International Travel eSIM: which to use and when?

They don't compete for the same thing. The Movistar eSIM solves your connection within your country; a travel eSIM solves the period when you are outside that coverage. The following table summarizes when each makes sense.

Criterion Movistar eSIM (local line) International travel eSIM
Purpose Calls, messages, and data in your country of residence Cellular data in the country you visit
Coverage Movistar network within your plan's country More than 200 destinations with a single account
Activation QR provided by Movistar; timing depends on operator availability Activation in approximately 1 minute after purchase
Validity for code activation Depends on your Movistar plan's terms 180 days from the purchase date
Support if something goes wrong Movistar's own channels (app, store, web) 24/7 support in all languages via email and WhatsApp
Your usual number Remains as the primary line Does not replace it: acts as an additional data line

In practice, most travelers don't choose between one and the other: they keep the Movistar eSIM active for their usual number and add an international travel eSIM only for the days they are out of coverage. If you have never installed a second eSIM on the same iPhone, the procedure is practically identical to what you already did in section 1, and you can review the full details in the step-by-step eSIM installation guide.

Frequently asked questions

Do I need Wi-Fi to activate the Movistar eSIM?

Yes, in most cases. Activation requires an internet connection to verify the profile with the Movistar server, and since you don't have an active cellular line at that moment, Wi-Fi is the most reliable way to have it.

Can I activate the Movistar eSIM without changing my number?

Yes. If you are moving your existing line from a physical SIM to an eSIM, or from one iPhone to another, the number remains the same. What changes is the type of profile your device uses, not the line itself.

What should I do if I lost the Movistar QR code?

You can check the original email Movistar sent you or look for it within the Mi Movistar app, in the line management section. If it doesn't appear anywhere, you need to request a new one, as it cannot be manually reconstructed without that code.

Can I have the Movistar eSIM and a travel eSIM at the same time?

Yes. eSIM-compatible iPhones support two active lines simultaneously. You can leave the Movistar eSIM as your primary line for calls and messages and use a second eSIM only for data when traveling.

How long does it take for the eSIM to activate after scanning the code?

It usually takes seconds. During peak demand on Movistar's side, it can extend to a couple of minutes, but if more than ten minutes pass without changes, it's likely that the process got stuck and you should restart the attempt.

Why does my iPhone say "Action could not be completed" when activating?

That message indicates that the iPhone failed to communicate correctly with the Movistar server during profile verification. The most common causes are an already used code, an unstable connection, or a temporary overload of the operator's server.

Is the Movistar eSIM useful if I travel to another country?

It may still show coverage, but usage outside your home country is usually subject to roaming conditions different from your local plan. For data while traveling, an eSIM designed specifically for the destination is usually simpler to calculate and activate.

Conclusion

For the vast majority of cases, activating the Movistar eSIM on an iPhone is resolved in the first steps of this article: Settings, scan the QR, confirm the plan. When it doesn't work on the first try, it's almost always one of five specific causes—code already used, outdated iOS, Wi-Fi without a real outlet, incorrect date, or a delay by the operator itself—and not an insurmountable problem with your device.

Now, if your specific situation is that you need a connection for a trip and the process with Movistar isn't moving forward in time, insisting with the same channel again and again isn't the best solution. In that scenario, the most direct approach is to resolve the trip segment separately: an international eSIM activates in approximately 1 minute, covers more than 200 destinations, and if something doesn't go as expected, you have 24/7 support in all languages via email and WhatsApp, without relying on store opening hours. You can buy it in advance and you have 180 days from purchase to activate it, so there's no need to resolve everything on the day of the flight.

If you're looking to understand eSIM technology in general before deciding anything, the explanation of what an eSIM is and the list of compatible phones are a good starting point. And if the problem you're having isn't exactly activation but a more general one, the guide to common eSIM problems covers cases not included in this article.

Marc González Sáez
Written byMarc González Sáez Founder of PuraSIM. He oversees the blog guides, which are built from our wholesale provider's network data, official carrier and manufacturer documentation, and real questions from travelers. If you spot something wrong, write to him and he'll correct it.
Share this guide

Your next trip, connected

Data in more than 200 destinations. No roaming. Activates in 1 minute.

Choose your eSIM